MPLOYR / British Columbia

[full-time] MECHANICAL ENGINEERING at Dr Abraham Olukayode

2010-06-11 08:17:43

Location: Anywhere
Description:

REED RECRUITERS LIMITED, pursuant to the service contract with ELF Petroleum Nigeria Limited (EPNL) a subsidiary of TOTAL FINAELF invites experienced and reputable persons having prime experience and capable of providing Mechanical Engineering Services (as individuals or in a team).

Brief description of the project area Obagi fields is in OML-58 concession at about 80km Northwest of Port-Harcourt. The well locations as well as the access road exist. The sites are accessible by land.

Description of the Scope of work:

You will serve as an expatriate consultant on Drilling Engineering Services for supervising contractors with the mandate to carry out line pipe coating for the project line pipe/ concrete coating for the diameter (24 inches or greater) line pipe and also pipeline/ concrete coating for long (25km or greater) pipeline, who also have the capability of pipeline/ concrete coating of 40 inches line pipe and the capacity to coat up to 100km of such line pipe within six(6) months.

Scope of Work:

1, To execute a job for pipeline/ concrete coating of 400 inches diameter line pipe of up to approximately 100km length.

2, To apply a three layer polythethylene pipeline/ concrete coating system to the exterior of the line pipe.

3, To optionally coat approximately 60km of 40 inches diameter line pipe for the project.
The contract terms will be well stated and expanciated by the agency in the hard copies that will be forwarded to you through courier services.

Expatriates in other engineering field are also required as follows:

Job Title: Building Ground Maintenace Engineer

Job Title: Geologist

Job Title: Petroleum Engineer

Job Title: Eletrical Engineer

Job Title: Environmental Engineer

Job Title: Drilling Engineer

Job Title: All Engineering field expatriates are required.

This programme would be carried out within the ELF petroleum gas to liquid processing facility Escravos. Blue Recruit Limited, as contractor for provision of technical support personnel, will require qualified Drilling Engineering Expatriates to execute the aforementioned work at ELF petroleum operational bases in River State, Lagos and Escravos, which is situated 100 miles South East of Lagos.

The current contract duration forecast is approximately Twelve (12) months, for technical support personnel, with an optional Twelve (12) months extension or a duration of “12 + 12” months

Additional Information

Salary indication (individual) ——-US$19,500 monthly

Position type: Contract

REED RECRUITERS LIMITED will be responsible for recruitment and only person found suitably qualified shall be invited.

ELF Petroleum Ltd. currently plans to execute contract starting from Second quarter, 2010.

Notification/ interest

All relevant information/ notification / CV/ Resume should be forwarded via word document attachment to the below email as follows for immediate consideration.

E-mail: reedrecruiters@excite.com

Dr Abraham Olukayode

REED RECRUITERS LIMITED

Apply to this job

[full-time] DRILLING ENGINEERING at BLUE RECRUITMENT LIMITED

2010-06-09 05:43:16

Location: Anywhere
Description:

We urgently require expatriates having prime experience in DRILLING ENGINEERING services.

Salary: Negotiable

Email: bluerecruit@blumail.org

Contact Person: Craig Johnson

Apply to this job

[full-time] ELECTRICAL ENGINEERING at BLUE RECRUITMENT LIMITED

2010-06-09 05:41:23

Location: Anywhere
Description:

We urgently require expatriates having prime experience in ELECTRICAL ENGINEERING services.

Salary: Negotiable

Email: bluerecruit@blumail.org

Contact Person: Craig Johnson

Apply to this job

[full-time] CIVIL ENGINEERING at BLUE RECRUITMENT LIMITED

2010-06-09 05:39:30

Location: Anywhere
Description:

We urgently require expatriates having prime experience in CIVIL ENGINEERING services.

Salary: Negotiable

Email: bluerecruit@blumail.org

Contact Person: Craig Johnson

Apply to this job

[full-time] MECHANICAL ENGINEERING at BLUE RECRUITMENT LIMITED

2010-06-09 05:36:05

Location: Anywhere
Description:

We urgently require expatriates having prime experience in MECHANICAL ENGINEERING services.

Salary: Negotiable

Email: bluerecruit@blumail.org

Contact Person: Craig Johnson

Apply to this job

[full-time] Gas Turbine Aerodynamics Engineer at Dennis Barber III

2010-06-02 10:36:36

Location: Jupiter, FL
URL: http://www.career-managementadvisors.com

Description:

If this position is of interest to you then please send your resume to:

dennis.careeradvisors@comcast.net
john.careeradvisors@comcast.net

or call Dennis 561-922-8891 or John 561-531-6228

POSITION SUMMARY
Provide design and analytical support to project and systems engineers in the aerospace and industrial fields. Construct Aerodynamic Models for both Compressor and Turbine Section of Gas Turbine Engine. Work closely with Performance, Thermal, Structural and Systems IPD team counterparts.

ESSENTIAL DUTIES AND RESPONSIBILITIES includes the following but not limited to:

- Construct aerodynamic models for compressor and turbine section of gas turbine engine – design blade/vane profiles to meet overall compressor/turbine design and engine requirement – Perform inviscid, meanline, viscous, and 3d NS cfd to analytically verify design. – Generate reports based on the design, analysis efforts and results. – Participate in a variety of design reviews with Customer and various IPD team members to meet
requirements of the program. – Propose testing and write test plans to experimentally verify aerodynamic design.
QUALIFICATIONS: – Excellent understanding of the laws of physics in the fields of thermodynamics,
fluid mechanics, and heat transfer, etc. –

REQUIREMENTS:
Experience with OEM or Commercially available Compressor and Turbine Design Codes.
Knowledge of military and commercial aerospace specifications, standards, design and
development. Proficiency with computers and common business and technical software such as
FORTRAN, MICROSOFT OFFICE, VisualBasic, C++
computer proficiency: CAE skills: Unigraphics, PRO-E as the specific codes.

Apply to this job

[full-time] Gas Turbine Performance Engineer at Dennis Barber III

2010-06-02 10:35:04

Location: Jupiter, FL
URL: http://www.career-managementadvisors.com

Description:

If you meet the requirements below and would be interested in hearing more about the position then please email your resume to:

dennis.careeradvisors@comcast.net or
john.careeradvisors@comcast.net

You can also call Dennis 561-922-8891 or John 561-531-6228

POSITION SUMMARY
Provide analytical support to project and systems engineers in the aerospace and industrial fields. Build and Maintain Thermodynamic Performance Models for Gas Turbine Engine. Provide Performance and Cycle data to Aero, Thermal, Structural and Systems IPD team counterparts.

ESSENTIAL DUTIES AND RESPONSIBILITIES includes the following but not limited to:

- Build, develop and maintain performance models on gas turbine engine systems – perform both steady state and transient analysis – Generate reports based on the analysis efforts and results. – Participate in a variety of design reviews with Customer and various IPD team members to meet
requirements of the program. – Preparing and maintaining both a steady state and a transient system performance model. – Work closely with various IPD team members to ensure results are verifiable. – With programming skills, build modules, not included in standard package to represent some
non-standard engine component or system.

QUALIFICATIONS: – Excellent understanding of the laws of physics in the fields of thermodynamics,
fluid mechanics, and heat transfer, etc.

REQUIREMENTS:
Experience with OEM or Commercially available Engine Performance/Cycle Decks.
Knowledge of military and commercial aerospace specifications, standards, design and
development. Proficiency with computers and common business and technical software such as
FORTRAN, MICROSOFT OFFICE, VisualBasic, C++.
Requires knowledge of mechanical, electrical, hydraulic and pneumatic principles.

Apply to this job

[full-time] Chief Virtual Organization Platform Architect, Guardian of the Holy Grail at Virtual Organization Management Institute

2010-02-28 16:25:03

Location: Anywhere
URL: http://www.virtualorganizationinstitute.com

Description:

Virtual Organization

“A Virtual Organization is an organization which strictly uses all of the following: a virtual workspace, a virtual workforce, and virtual organization management best practices, policies and procedures for operating in a 100% virtual environment.”
by Prof. Pierre Coupet of Virtual Organization Management Institute

Overview

WE ARE LOOKING FOR THE GUARDIAN OF THE HOLY GRAIL

We are laying the groundwork for what promises to be the global, spectacular phenomenon we call “VOMI: The Virtual Organization Holy Grail,” and are looking for The Guardian – an Unconventional, Unstoppable, Transformative, Entrepreneurial, and VISIONARY key person who will carry the Luminous Light of Virtual Organization Management Institute to the Media, Sponsors, Industry and to every single individual in every corner of the globe.

Unconventional Duties & Responsibilities:

This is NOT your typical-conventional bureaucrat position and, therefore, we’ll skip the nonsense about a conventional laundry list of things for you to do. As one of 13 Guardians of the Holy Grail, your duties and responsibilities will be defined by the corresponding title of one of the Guardian positions listed below, your vision of the broad mission we have laid out for you, and your own individual competencies. The titles of available Guardian positions are:

Chief of Staff, Guardian of the Holy Grail
President, VOMI Global Events Group-Guardian of the Holy Grail
President, VOMI Innovation & Research Lab-Guardian of the Holy Grail
Chief Revenue Officer, Guardian of the Holy Grail
Chief Social Media Officer, Guardian of the Holy Grail
Chief, Virtual Organization Talent-Guardian of the Holy Grail
Chief Strategy Officer, Guardian of the Holy Grail
Chief Education Officer, Guardian of the Holy Grail
Chief Virtual Organization Platform Architect, Guardian of the Holy Grail
Chief Counsel, Guardian of the Holy Grail
Chief Financial Officer, Guardian of the Holy Grail

Chief Security Officer, Guardian of the Holy Grail

Since we are a 100% virtual organization, you will work from wherever in the world you are located or wish to be and will operate in a completely 100% virtual environment.

WHAT’S IN IT FOR YOU?

Being The Guardian, you will see and know the phenomenal revenue and social potential behind Virtual Organization Management Institute (VOMI). If you need us to tell you what that is or want us to sell you on VOMI, then do not waste your time applying. Therefore, it will be up to you to know and tell us in a convincing fashion what’s in it for you. Dis moi ce que tu veux et je te dirai ce que tu vaux.

You will only report to the Founder & CEO of VOMI, the 13th Guardian of the Holy Grail, and your contribution to VOMI and the world will be the stuff of legend for generations to come and your global status and influence will reach mythical proportions.

We believe in our dream and hope you will soon tell us how you will help make it happen.

THE NEXT BIG THING

Walt Disney created the magic; MTV could not have imagined the global impact it was going to have on pop culture; Microsoft’s mindboggling contribution to the world is still immeasurable; the magic of the Internet is just unbelievable; the phenomenal rise of Google, The Lion of the Web; and here comes Virtual Organization Management Institute, The Virtual Organization Holy Grail that will forever transform—and revolutionize our concept of—the organization as we know it today.

Come and be a part of history! This is not a job. If you absolutely need a job, apply somewhere else. It is a ONCE IN A LIFETIME OPPORTUNITY!

Requirements:

VISION. Ability to withstand the [[most]] unconventional and rigorous executive recruitment and selection process anywhere in the world via our proprietary Symphonic Recruitment Model.

How to Apply:

Apply online via the VOMI Careers site or send resume via email to:

Prof. Pierre Coupet
chairman@virtualorganizationinstitute.com

ABOUT VOMI: Virtual Organization Management Institute is the world’s leading and only global educational institute, think tank, professional association, certification and accreditation provider, and conference producer strictly focused on the modern virtual organization management discipline founded and pioneered by the founder of VOMI since 1997.

http://www.virtualorganizationinstitute.com

Apply to this job

[full-time] Junior Quality Assurance Engineer at KCC Canada

2009-06-10 13:14:48

Location: Burnaby
URL: http://knowledgecc.com

Description:

Job Description:

KCC Knowledge Computing Canada Ltd. (KCC) is a leading Knowledge Management Systems company focused on providing state-of-the-art technologies for organizing vast quantities of structured and seemingly unrelated information in the law enforcement arena. KCC’s business approach is to deliver efficient, accurate and focused solutions that enable clients to leverage new and existing knowledge assets.

The Opportunity

KCC develops the technology for COPLINK®, and industry leading law enforcement information system. We’re hiring staff to analyze, validate, and verify information sharing systems for law enforcement agencies. We use in-house and industry-standard tools and technologies to perform duties related to data analysis, conversion, consolidation and synchronization.

When you work at KCC Canada you help fight crime. When we connect an agency to COPLINK® we give law enforcement officers a powerful tool that helps them solve crimes faster and to make our communities safer.

KCC Canada is a wholly owned subsidiary of Tucson based Knowledge Computing Corporation. Our office is located in Burnaby, BC.

Description

As a junior QA you will aid to ensure the highest quality products and services are deployed to our clients. The ideal candidate has a solid technical skills set and experience with quality assurance but most of all a desire to learn new technologies and utilize that knowledge to implement test technologies (automated testing included).

Tasks

Create relevant documentation in accordance with company standards.
Under guidance create system, integration, and regression test cases and applies these against developed software to ensure quality.
Work with stake holders (customer, PM, BA) and members of the engineering department (testers, developers, operations team) as needed, to ensure quality and the successful rollout of new applications or features.
Learn new technologies as needed to successfully perform these duties.

Contributing to project reports or customer driven evaluations.

Required Skills

Excellent communication skills, including the ability to present and explain technical information in an unambiguous way.
Strong problem solving skills and the ability to investigate work-around solutions
Ability to work independently or within a team (collaboration with other team members and interaction with cross-functional teams)
Time-management and prioritization skills.
Presentation / Reporting skills; ability to communicate inputs and ideas within collaborative sessions, formal & informal presentations, and in written form

Ability to document and report issues in a timely manner.

Required Knowledge

Bachelor’s degree or certificate. Preferred in Mathematics, Natural Sciences, Computer Science or Engineering.
Experience in Quality Control and software testing; i.e. performing different testing methods like functional, usability or system testing.
Knowledge of SLDC and QA processes and methodologies.

MS Office Suite

Assets

Experience in any of the following areas a plus: .NET/C#/ASP.NET, SQL Server 2005, XML, XPATH, XSLT, XSD, MS Team Foundation Server
Experience in Test automation a definitive plus

Experience in an agile development environment.

All offers of employment at KCC Canada are subject to fingerprinting and criminal record checks in Canada and the USA.

Response Information:

Please reply with a resume in Word or .pdf format to careerscanada@knowledgecc.com.

We thank all who show an interest in joining our company, but due to the volume of applications, only those selected for an interview will be contacted.

Apply to this job

[full-time] Process Engineer at Creation Technologies

2009-05-21 15:21:03

Location: Burnaby
URL: http://creationtech.com

Description:

Job Description:
CREATE YOUR FUTURE WITH US!

Creation Technologies is a leading Electronics Manufacturing Service provider. We are currently seeking an experienced Process Engineer to work in our Burnaby facility.

DUTIES/RESPONSIBLITIES INCLUDE, BUT ARE NOT LIMITED TO:

Focus on key processes (SMT and TH) and Auxiliary processes (Mechanical Assembly, Coating, Rework, etc) to facilitate smooth production ramp up of new and existing product lines.
Interface with the customer, Product Engineers, Production Associates, Process Engineers and Management to achieve the following:
Capacity
High First Pass Yields
High efficiency
Time to Market

Develop and implement a plan to continuously improve the product cycle time through production and the product quality by focusing on the following:
Error and defect data analysis in order to prevent errors from becoming defects
Assembly fixtures and jigs
Automation
Test fixtures
Elimination of redundant and non-value added operations
Optimizing the product and process flow
Proactively pursue better methods and/or new technologies in order to assist the customer in improving the product design and enabling CTI to produce a better product cost effectively
Implementing Lean manufacturing techniques.

QUALIFICATIONS

Bachelor’s degree in Electrical Engineering, Mechanical Engineering or Industrial Engineering
1 + years in a team lead/leadership role. Good inter-personal and training skills
Must have excellent communication skills, technical writing abilities, analytical skills
Strong team player while able to function independently and with minimal supervision
Must have at least three years of manufacturing experience
Preference will be given to a candidate with relevant technical training and experience associated with Process Engineering, particularly with the SMT /TH processes.

Experience in Contract Electronics Manufacturing and Process Engineering a definite advantage!

Response Information:
Please forward your resumes to futureswest@creationtech.com – indicate on the subject line “Process Engineer”
By fax: Attention HR, 604 430 4337

Visit our website – www.creationtech.com

Apply to this job